 |
|||
|
Page Title:
Table II. Major defects AQL - 25 defects per 100 units |
|
||
| ||||||||||
|
|  MIL-T-62223B(AT)
TABLE II. Major defects AQL - 25 defects per 100 units.
Defect
Method of
number
Characteristic
Major defects
inspection
Visual
101
Exterior paneling
Unevenness, buckling, warping,
missing or damaged rivets,
overlapped panel surfaces not
sealed, excessive or sloppy
application of sealing material,
surface defects (see 3.5.2.1 and
3.7.5)
102
Wind deflector
Curved surface not blended smooth
Visual
fairing
into body cross section, excessive
deflection or cracking, interference
with tilting cab, surface defects
(see 3.5.2.2)
103
Doors and door
Improper fit, not alined, warpage,
Visual and
hardware
sloppy application of door seals,
operational
improper material, inoperative door
hardware, surface defects
(see 3.5.2.3 and 3.7.6)
104
Pull-out and
Damaged, defective, improper fit,
Visual and
fold-out steps
binding or interference, inoperative
functional
(see 3.5.2.3)
105
Sliding windows
Sloppy installation of weatherproof
Visual and
seals, windows not easily opened or
operational
adjusted to various openings,
defective glass (cracks, scratches,
nicks) (see 3.5.2.4 and 3.7.6)
106
Internal panels
Unevenness, buckling, gaps, open
Visual
seams, improper fit of joiners,
edgings, moldings and surface
defects (see 3.5.4 and 3.7.5)
107
Floor surfacing
Gaps, waviness, cracks, bulges, open Visual
seams, not secured, improper
application of sound deadening
material, thin or bare areas (see 3.5.5
and 3.7.8)
32
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals