 |
|||
|
Page Title:
Standard vehicle and accessories |
|
||
| ||||||||||
|
|  MIL-T-62518A
(Application for copies of SAE publications should be addressed to SAE, Inc.,
400 Commonwealth Drive, Warrendale, PA 15096.)
THE TIRE AND RIM ASSOCIATION, INC.
Year Book
* (Application for copies of Tire and Rim Association publications should be addressed to The
Tire and Rim Association, Inc., 175 Montrose West Ave., Copley, OH 44321.)
* (Non-Government standards and other publications are normally available from the
organizations that prepare or distribute the documents. These documents also may be available
in or through libraries or other informational services.)
* 2.3 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein, the text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been
obtained.
3. REQUIREMENTS
* 3.1 Standard vehicle and accessories. Except as specified in 3.1.1 through 3.1.1.15, the
vehicles, components and accessories to be delivered under the contract as further identified and
qualified in the product experience clause of this solicitation shall be standard or optional items
sold commercially to the public which meet or exceed the requirements of this specification.
Except as specified in 3.1.1 through 3.1.1.15, no removal, substitution or alteration of the chassis
manufacturer's standard or optional chassis model components shall be made. All chassis items
shall be as represented in the chassis manufacturer's technical data book. Special bodies or
mounted equipment shall be as represented in the body and equipment manufacturer's technical
data. Technical data shall be limited to specifications and technical material identical to that
furnished to the authorized company representatives for selection of vehicle models and
components, and shall be available to the engineering offices of the procuring activity, prior to
delivery of the items. The chassis model furnished shall be not older than the chassis
manufacturer's current model on the date of invitation for bids.
3.1.1 Special requirements. In addition to the standard vehicle and components specified in
3.1, the vehicle shall be furnished with special equipment as specified herein.
* 3.1.1.1 Treatment and painting. The vehicle shall be treated and painted in accordance with
MIL-STD-1223. The exterior color shall be gloss yellow, matching color chip No. 13538 of
FED-STD-595. Extruded, molded or spiral wound booms and baskets need not be painted.
7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals