|
| ![]() MIL-T-62531(AT)
4.1.11 Quality conformance inspection (QCI). QCI shall consist of the examinations and
tests specified herein and shall be performed in the following sequence and utilizing an approved
Final Inspection Record (FIR).
a. Examination for the defects specified in table VI and classified in table II.
b. A _______ kilometer road test in accordance with 4.1.13.
c. QCI specified in table II.
4.1.11.1 One hundred percent. Each vehicle shall be subjected to the QCI specified
in 4.1.11.
4.1.11.2 Acceptable quality level. When authorized by the Government acquisitioning
authority, one hundred percent QCI (see 4.1.11.1) shall be waived. Thereafter, samples shall be
selected in accordance with 4.1.12.2 and shall be inspected to determine conformance to the
following acceptable quality levels (AQL).
Classification
AQL
Major
25/100 units
Minor
150/100 units
4.1.12 Sampling.
4.1.12.1 Lot formation. An inspection lot shall consist of each model type of vehicles
produced in one month submitted at one time for acceptance,
4.1.12.2 Sampling for inspection. When sampling is authorized for QCI (see 4.1.11),
samples shall be selected in accordance with general inspection level II of MIL-STD-105.
Before sampling may be initiated, the contractor shall examine at least ______ consecutively
produced vehicles. The examination shall establish that the process average percent defective, as
defined in MIL-STD-105, is not greater than the specified AQL.
25
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |