 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-81527B(AS)
32 inches by 25 inches by 51 inches.
The structure shall contain a cutout
at the right rear to provide space for the installation of the column of the
RF Section Support Assembly.
A clevis and quick release pin shall be
installed on the structure.
It shall mate with the clevis on the Support
Assembly to secure the frame of the RF Section Support Assembly in the
90-degree extended position. Attachment points shall be provided at the
rear of the Base Structure for the Rear Frame.
The Base Structure shall
be designed to mount the Pallet Shaft Assembly and to secure it in various
service positions.
The Base Structure shall contain the following
3.4.1.6.2.4.3 Contents.
substructures:
(a) Bench Top
b) Drop Leaf
(c) Cradle Slide Assembly
(d) Power Supply Support
(e) Grounding Wand
3.4.1.6.2.4.3.1 Bench Top.
The Bench Top shall form the basic work
3.4.1.6.2.4.3.1.1 Function.
surface of the Receiver Section Bench Assembly.
The Bench Top shall be a nominal 51
3.4.1.6.2.4.3.1.2 Form Factor.
inches by 28 inches and its surface shall be a nominal 32 inches above the
The surface of the Bench Top shall be constructed of masonite bonded
deck.
The configuration of the Bench Top shall conform to the outline
to aluminum.
of the Base Structure including the cutout section reserved for the RF Sec-
The Bench Top shall have a filler section to allow
tion Support Assembly.
the Pallet Shaft Assembly to be mounted on the Bench Top.
3.4. 1.6.2.4.3.2 Drop Leaf.
3.4. 1.6.2.4.3.2.1 Function. The Drop Leaf shall expand and enlarge the
work surface area of the Receiver Section Bench Assembly and shall serve
11
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals