 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-81527B(AS)
(o) PLM ACQ (Pilot Lockon Mode-Acquisition) - A five-position, three-
pole rotary switch shall provide simulation of the half-action, full-action
The switch positions shall be fixed and
switch on the pilot's control stick.
Two modes
shall not simulate the spring return feature of the pilot's switch.
of switching shall be provided, a normal mode which shall simulate electrically
the pilot's switch and an antenna test mode during which the bore sight signal
to the Scan Pattern Generator shall be interrupted in the half-action position
so that the antenna remains in the elevated position for checking.
A single-pole single-throw toggle switch shall
(p) DF (Dogfight) -
simulate the pilot's switch and apply a +28 Vdc control signal to the Tracker,
Target Data.
(q) MSL TRIG (Missile Trigger) - A single-pole single-throw toggle
switch shall simulate the pilot's missile firing button and apply a +28 Vdc
firing signal to the computer firing relay contacts.
{r) SEAM (Sidewinder Extended Acquisition Mode) - A three-position
toggle switch shall simulate inputs to the AWG-10 indicators from the AN/
These consist of a +28Vdc SEAM lock signal to
ASA-63 programmer.
activate the SEAM displays and the azimuth and elevation signals for the aim
Two aim dot positions shall be simulated, one at OV, -OV and the other
dot.
in the lower right quadrant: +6v, -6v.
(s) ANN LAMP (Annunicator Lamp) - A single-pole single-throw toggle
switch shall energize all lamps in the Command Indicator via a set of steering
diodes as a lamp check.
(t) GEAR INTLK (Gear Interlock) - A single-pole double-throw toggle
switch shall simulate switches activated by weight on the aircraft landing
gear and the nose wheel retraction and associated relays. The switch shall
be appropriately connected to the W/G switch logic circuits in the radar.
27
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals