 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-815273(AS)
3.4.2.7.4.3 Cable Assembl y, Antenna Interconnecting, 64W1.
The Antenna
Interconnecting Cable Assembly shall be nominally 6 feet in length including
the connectors and the two-branch division. It shall provide electrical
inter connection between the Antenna Control BOX and the AN/APG-59 Antenna
on the Antenna Maintenance Fixture.
3.4.2.7.5 Hydraulics Panel.
3.4.2.7.5.1 Function.
This unit shall permit the Hydraulic Supply to de-
liver fluid to either the .Antenna mounted on the Antenna Support Fixture or
the Antenna Maintenance Fixture. An electrical interlock shall also be pro-
vided to assure control of the Hydraulic Supply by the facility using it.
3.4.2.7.5.2 Form Factor.
The Hydraulic Panel shall consist of the
hydraulic transfer valve, fittings, and check valves on a support bracket.
This panel, although a part of the Antenna Maintenance Fixture, shall attach
to the Antenna Support Fixture. The overall dimensions, exclusive of the
interconnecting lines, shall be 15 7/8 inches by 71/8 inches by 14 1/2
inches.
The weight of the unit, excluding interconnecting lines, shall not
exceed 27 pounds.
The Panel shall have the following quick disconnect
3.4.2.7.5.3 Fittings.
fittings:
Function
Connects pressure side of Hydraulic Supply to Panel
Connects return side of Hydraulic Supply to Panel
Connects pressure side of Panel to Antenna Support Fixture antenna
Connects return side of Panel to Antenna Support Fixture antenna
Connect pressure side of Panel to Antenna Maintenance Fixture antenna
Connects return side of Panel to antenna Maintenance Fixture antenna
3.4.2.8 Associated Equipment. The Hydraulic Pumping Unit is required to
work in conjunction with the Antenna Maintenance Fixture.
78
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals