|
| MIL-T-81527B(AS)
3.4.3.5 Contents of Unit.
The WE shall consist of the following items:
(a) Microwave Structure
(b) Microwave Control Panel Assembly
(c) Interfacing Cabling
(d) Installation Kit
3.4.3.5. 1 Microwave Structure.
The basic Microwave Structure shall provide the
3.4.3.5. 1.1 Function.
physical and RF energy interfaces between the AN/APG-59 Radar Set and the
Receiving Microwave Assembly and/or the Bit Target Generator. It shall
include the microwave components required to perform the test and/or cali-
The Microwave Structure wiring harriess shall provide
bration functions.
for interconnection between the Microwave Control Panel Assembly, the
microwave components, and the AN/APG-59 Radar Set. Design of the
harness shall conform to MIL-H- 15362 and shall be color coded in conformity
with MIL-STD-681 where applicable.
The basic structure shall be a U- shaped fixture
3.4. 3.5.1.2 Form Factor.
with provision to fasten the WE to the AN/APG-59 Radar Set structure in the
space normally occupied by the Receiving Microwave Assembly. Microwave
components; such as waveguide switches, coaxial switches, fixed and variable
attenuators, hybrids, isolators, directional couplers, frequency meters,
etc;
shall be included in configuration to permit interfacing between the Radar Set
and the Receiving Microwave Assembly and connection to the Bit Target
Various circuit configurations, as required for test and/or calibra-
Generator.
tion shall be switched electrically and require no physical relocations of micro-
Provision shall be made to support the Receiving Microwave
wave components.
Assembly and Bit Target Generator, and to provide for ducting of cooling air
from the Radar Set structure to the Receiving Microwave Assembly.
3.4.3.5.2 Microwave Control Panel Assembly.
3.4.3.5.2.1 Function.
Except for WE turn on and off, the Microwave
Control Panel Assembly shall provide all s wit thing and control functions
81
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |