Click here to make tpub.com your Home Page

Page Title: Quality Assurance Provisions
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-T-82570A(OS)
3.7 Workmanship. The equipment, including all parts and accessories,
shall be constructed and finished in a manner to ensure compliance with
all requirements of this specification.  Particular attention shall be
paid to neatness and thoroughness of soldering, wiring, impregnation of
coils , marking of parts and assemblies, plating, riveting, machine screw
assemblage, welding, brazing, and freedom of parts from burrs and sharp
edges.  The standards of workmanship exhibited in any approved pre-
production sample, subject to any qualification stated in the Government's
notice of approval, shall be determinative of the requirements of the
contract relative to workmanship insofar as not specifically covered by
applicable  specifications.
4.
QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection.  Unless otherwise specified in the
contract or purchase order, the supplier is responsible for the per-
formance of all inspection requirements as specified herein.  Except as
otherwise specified in the contract or order, the supplier may use his
own or other facilities suitable for the performance of the inspection
requirements specified herein, unless disapproved by the Government.
The Government reserves the right to perform any of the inspections set
forth in the specification where such inspections are deemed necessary
to assure supplies and services conform to prescribed requirements.
4.2 Classification of inspections.  The examination and testing of
Torpedo Tubes Mk 32 Mods 5 and 7 shall be classified as follows:
a.  Preproduction inspection.  The inspection of the preproduction
sample submitted in accordance with 4.3.1 (See 4.5).
b.  Quality Conformance inspection.  Tests and examinations performed
on each torpedo tube assembly to be submitted for acceptance under
contract (See 4.4).
c.  Periodic production inspection.  The inspection of periodic
production samples submitted in accordance with 4.3.3 (See 4.5).
d.  Post-delivery inspection.  Unless otherwise specified in the
contract or order (See 6.2), the Government reserves the right to
conduct any or all of the tests and examinations of this specification
after installation of the torpedo tube aboard a Naval vessel.  Any
defects due to the contractor's failure to comply with drawings or
specifications for this equipment, discovered during or after these
tests or examinations, shall be corrected by the contractor at no
expense to the Government , provided the contractor is notified of such
defects within the guarentee period of the contract.
10

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business