 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-85027(AS)
3 .2.1 Design features.
Not applicable.
The ABTS shall be
3.2.1.1 Method of operation.
manually operable.
3.2.1.2 Commercial test equipment.
Not applicable.
3.2.1.2.1 Other commercial components. Other
commercial components (such as power supplies, tape readers,
or tape recorders) , may be incorporated in the ABTS. When
installed in the ABTS, they shall meet the environmental and
electrical service conditions of this specification.
3.2.1.3 Circuit grounds.
Not applicable.
3.2.1.4 Interchangeability. Interchangeability
shall be in accordance with MIL-STD-454, Requirement 7.
MIL-T-21200
3.2.1.5
Identification of product.
shall apply.
3.2.1.6 Human factors. The human engineering
requirements of MIL-STD-454, Requirement 62, shall apply.
3.2.1.7
Not
Test set generated acoustic noise.
applicable.
Forced-liquid cooling.
Not applicable.
3.2.1.8
3.2.1.9 Space and weight limitations. The maximum
size of the elements of the ABTS when stored in the storage
case shall be 20 inches by 14 inches by 13 inches. The
maximum weight of the ABTS shall be 45 pounds.
3.2.1.10 Connectors.
Not applicable.
3.2.1.11 Secondary electrical power.
Not
applicable.
3.2.1.12 Interface.
The ABTS shall interface with
Antenna AS-2764( )/AWG-9.
The test set shall be designed to
3.2.2 Utilities.
accept the utilities specified herein.
3.2.2.1 Electrical power. The electrical power
required for operation of the ABTS shall be 115 volts, 60
Hertz, single phase, 5 volt-amperes maximum from a facility
utility outlet.
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals