 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-85472A(AS)
3.6.7.2.2 115V, 60 CPS indicator. This indicator lamp shall illuminate
when 115V, 60 Hz power is applied to the test console.
3.6.7.2.3 5A, 115V, 60 CPS fuse (F1). This 5-ampere fuse shall provide
circuit protection for 115V, 60 Hz power.
3.6.8 Cabinet console assembly. The cabinet console assembly shall be
manufactured in accordance with DL412AS9000 and shall meet the requirements
stated thereon and as specified in 3.6.8.1.
3.6.8.1 Cabinet basic requirements. The cabinet shall be manufactured of
steel and shall be capable of supporting five rack-mounted assemblies, a front
mounted assembly and a pull-out desk. The cabinet shall be supported on two
fixed and two swivel casters. A lift-out access panel shall be provided for
the back of the cabinet permitting easy access to the rear of the drawer
assemblies.
3.6.9 Phase I antenna shroud assembly (2A1). The Phase I antenna shroud
shall be manufactured in accordance with DL412AS9000 and shall meet the
requirements stated thereon and specified in 3.6.9.1.
3.6.9.1 Phase I antenna shroud description and functions. The shroud
assembly shall consist of a transmit/receive antenna enclosed in a shroud.
The shroud antenna shall be capable of receiving from and radiating to the
weapon antenna. The shroud shall be capable of preventing radiated power of
the antenna from exposing nearby equipment and personnel. This shroud shall
be designed for use in testing Phase I simulated data link weapons.
3.6.10 Phase II antenna shroud assembly (3A1). The Phase II antenna shroud
shall be manufactured in accordance with DL412AS9000 and shall meet the
requirements stated thereon and specified in 3.6.10.1.
3.6.10.1 Phase II antenna shroud description and functions. The shroud
assembly shall consist of a transmit/receive antenna enclosed in a shroud.
The shroud antenna shall be capable of receiving and radiating signals to and
from the weapon antenna. The shroud shall be capable of preventing this
radiated power of the antennas from exposing nearby equipment and personnel,
This shroud shall be designed for use in testing Phase II simulated data link
weapons.
3.6.11 Cable assemblies. Cable assemblies shall be manufactured to meet the
requirements specified in 3.6.11.1 through 3.6.11.7.
3.6.11.1 Cable assembly (W32). This cable assembly shall be used for 115V
ac, 60 Hz power cable. The cable assembly shall be manufactured in accordance
with DL412AS9000.
This cable assembly shall be manufactured in
3.6.11.2 Cable assembly (W34).
accordance with DL412AS9000.
3.6.11.3 Cable assembly (W35).
This cable assembly shall be manufactured in
accordance with DL412AS9000.
3.6.11.4 Cable assembly (W36).
This cable assembly shall be manufactured in
accordance with DL412AS9000.
20
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals