|
| MIL-U-17293D(SH)
(c) Heating element is cleanable without requiring removal from
unit.
(d) Replacement of fan motor.
(e) Replacement of motor bearings.
4.7 Reports. The contractor shall prepare reports in accordance with
the data ordering documents included in the contract or order (see 6.2.2) for
the following:
(a)
First article test (see 4.3).
(b)
Shock tests (see 4.3.3).
(c)
Vibration tests (see 4.3.4.1).
(d)
Maintainability demonstration (see 4.6).
4.8 Inspection of packaging. Sample packages and packs, and the inspec-
tion of the preservation-packaging, packing and marking for shipment and storage
shall be in accordance with the requirements of section 5 and the documents
specified therein.
PACKAGING
5.
(The preparation for delivery requirements specified herein apply only
for direct Government acquisition. For the extent of applicability of the
preparation for delivery requirements of referenced documents listed in
section 2, see 6.5).
5.1 Preservation, packaging, packing and marking. Unit heaters shall be
preserved, packaged, packed and marked level A or commercial as specified
(see 6.2.1).
6.
NOTES
The unit heaters are used as a heating system aboard
6.1 Intended use.
Naval ships.
6.2 Ordering data.
Acquisition documents should specify
6.2.1 Acquisition requirements.
the following:
Title, number and date of specification.
(a)
(b)
Class and size required (see 1.2).
(c)
If first article inspection is required (see 3.1).
(d)
Level of preservation, packaging, packing and marking required
(see 5.1).
(e) On board repair parts required (see 6.4).
6.2.2 Data requirements. When this specification is used in an acquisi-
tion which incorporates a DD Form 1423, Contract Data Requirements List (CDRL),
the data requirements identified below shall be developed as specified by an
approved Data Item Description (DD Form 1664) and delivered in accordance with
the approved CDRL incorporated into the contract. When the provisions of
DAR 7-104.9 (n)(2) are invoked and the DD Form 1423 is not used, the data
13
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |