 |
|||
|
|
|||
| ||||||||||
|
|  MIL-V-29592(AS)
5.1.1.2 Preservation. The automatic air vent shall be flushed and
filled 80 to 90 percent with hydraulic fluid conforming to MIL-H-46170,
filtered through a filter assembly conforming to MIL-F-81836 and sealed with
closures conforming to MIL-C-5501.
5.1.1.3 Packaging. The automatic air vent valve shall be packed in
accordance with MIL-P-116, Method IC1 and placed in a fiberboard box in
accordance with PW-B-636, conforming to W6s or W6C.
5.1.2 Level C. Valves shall be clean and preserved as for Level A and
packaged in a manner to prevent deterioration and damage during handling and
shipment from the supply source to the first receiving activity for
immediate use.
Valve packages per 5.1, shall be packed Level A or C as
5.2 Packing.
specified (see 6.2).
5.2.1 Level A. Valves shall be packed in wood-cleated plywood boxes
conforming to PPP-B-601, Grade A. Gross weight of each box shall not exceed
200 pounds.
5.2.2 Level C. Valves shall be packed in a manner to assure carrier
acceptance and safe delivery to destination.
5.3 Marking. In addition to special requirements of the contract or
order, interior packages and exterior shipping containers shall be marked in
accordance with MIL-STD-129, and include the following:
M29592/YY-ZZ (Insert slash sheet number and dash size)
Month and year of manufacture
Class and size
6.
NOTES
(This section contains information of a general or explanatory nature that
may be helpful, but is not mandatory.)
6.1 Intended use. The air vent valve is intended for use in aircraft
hydraulic systems where operating temperatures and pressures are withiri the
limits specified in the applicable military specification sheet. The
automatic air vent valve is intended to be mounted on or connected as close as
possible to the hydraulic reservoir.
Acquisition documents must specify the
6.2 Acquisition requirements.
following:
Title, number and date of the specification.
a.
b. Issue of DODISS to be cited in the solicitation, and if required,
the specific issue of individual documents referenced (see 201.1).
When first article inspection is required (see 3.1, 4.4 and 6.4).
c.
Test fluid if other than MIL-H-83282.
d.
15
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals