Click here to make tpub.com your Home Page

Page Title: Air inlet and outlet connections
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-V-81995(AS)
Air inlet and outlet connections. The valve connections
3.8.2
shall be as described on the specification sheet.
3.8.2.1
Mechanical loads and moments. Valve air inlet and
outlet flanges shall be capable of withstanding the loads and moments as
specified in the specification sheet.
Air inlet pressure loads.  The valve air inlet
3.8.2.2
flange shall be capable of withstanding the tensile load resulting from
the maximum air pressure specified on the specification sheet when the
valve is closed.
Extraneous loads and moments. The starter air inlet
3.8.2.3
flange shall be capable of withstanding, simultaneously, the acceleration
forces defined in 3.7.1.1, the tensile load defined in 3.8.2.2, and the
mechanical loads and moments defined in 3.8.2.1.
Reliability and maintainability.
3.9
Reliability Program.  The manufacturer shall prepare
3.9.1
a proposed reliability program plan for the valves in accordance with
MIL-STD-785 and shall submit it to the Qualifying Activity.  Qualification
approval will not be granted to a product until a reliability program
for the product has been approved by the Qualifying Activity, in addition
to the product's passing the Qualification tests specified herein.
Maintainability Program. The manufacturer shall
3.9.2
prepare a proposed maintainability program plan for the valves in accordance
with MIL-STD-470 and shall submit it to the Qualifying Activity.  Quali-
fication approval will not be granted to a product until a maintainability
program for the product has been approved by the Qualifying Activity, in
addition to the product's passing the Qualification tests specified ,
herein.
Marking.
3.10
Identification of product.  Equipment, assemblies,
3.io.l
and parts shall be marked as specified in Standard MIL-STD-130. Valves
shall be marked with the following information:
VALVE, STARTER CONTROL, AIRCRAFT ENGINE, MODEL
Specification:  MIL-V-81995(AS)
M81995/*
**LESS ISSUE
Manufacturer's part number
Manufacturer's serial number
Government order or contract number
Federal stock number
NOTES :
* Complete the part number by inserting
applicable specification sheet slash number
For use by Naval Air Rework Facilities.
16

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business