 |
|||
|
Page Title:
Relection and retest of units submitted for individual inspection |
|
||
| ||||||||||
|
|  MIL-V-81995(AS)
If the manufacturer does not correct and return components rejected
during sampling testing within thirty days after he receives them from
the qualifying activity or does not submit a program acceptable to the
qualifying activity for the correction of deficiencies noted within
fifteen days, the component will be disqualified.
4.2.5
Disassembly and inspection. At the conclusion of
tests, each sample will be disassembled as necessary to inspect for
wear, defects, and overheating.
Test report. A qualification test report is required
4.2.6
and shall be prepared in accordance with MIL-sTD-831.
Each unit produced under
Individual inspection.
4.3
this specification will be accepted if:
Qualified to this specification in conformance
a.
to 4.2.
Individual tests of Table II are successfully
b.
completed.
c. Installation instructions approved by the
qualifying activity are securely attached to each system component in
such a way that they need not be removed for check out of the component
--4nw *- A-u +n.t.llnt+nn ~g ~hp airrr$lft.
pAAw. -w 4*. *.."--*-- -----
Relection and retest of units submitted for individual
4.3.1
inspection. Units that have been rejected may be reworked or have parts
replaced to correct the defects and resubmitted for Individual inspection.
Before resubmitting, full particulars concerning previous rejection and
the action taken to correct the defects found in the original shall be
furnished the Government Inspector.
Test conditions. Unless othewise specified in this
4.4
specification and the specification sheet, all tests shall be conducted
at an ambient temperature range of 50 -120F (10 -49C), at rated air
inlet conditions as specified on the specification sheet, and with the
exhaust conditions at the prevailing laboratory atmospheric pressure.
Test apparatus.
4.4.1
Airflow. Airflow measurements shall be made using a
4.4.1.1
flowmeter conforming to ASME report: Fluid Meters, Their Theory and
Applications, Sixth Edition.
22
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals