Click here to make tpub.com your Home Page

Page Title: Approved source/quality verified parts list (AS/QVPL)
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-V-85033A(AS)
When the part is manufactured and qualified to a military speci-
b.
fication not including all requirements of the application, and
additional tests for such requirements have been performed.
c.
When the part is not qualified to a military specification, but
all tests appropriate to the application have been performed.
3.2.4 Approved source/quality verified parts list (AS/QVPL). An AS/QVPL
shall be prepared by the contractor for all subassemblies and parts for ap-
proval by the procuring activity.  All entries on the AS/QVPL shall be fully
substantiated by the preparation of data to satisfy the requirements of source
approval and part test approval as specified herein.  Reports of all quality
verification testing shall conform to the requirements of MIL-STD-831. The
contractor may solicit from the procuring activity information as to the status
of quality verified parts and approved sources which may have been previously
developed.  Neither part environmental tests nor part environmental test re-
ports are required in those instances where vendors are selected from current
AS/QVPLs of other programs.  Entries on the AS/QVPL shall identify the vendor
and the product which is proposed for use in the charging valves by the con-
tractor.  In the event several sources have previously been approved for the
application, the contractor shall specify the source of the parts to be used.
Each item listed shall be supported in accordance with the previsions of this
section.  This listing does not supplant or modify the applicable documenta-
tion or other Government Qualified Parts Listing.
.
3.2.4.1 Conditions governing the quality verification of parts.  When the
contractor proposes to demonstrate the quality verification of parts, as
provided herein, the following provisions shall apply:
a.
Test may be performed by the contractor, utilizing his own
facilities, the facility of the manufacturer of the part or
by any other suitable facility selected by the contractor.
In any event, the facilities shall be approved by the con-
tractor prior to the performance of any test.  This information
shall be prepared for approval by the procuring activity.
b.
Prior to the performance of any test, a detailed test proce-
dure shall be prepared by the contractor and approved by the
procuring activity.  The procedure shall identify, as a
minimum, the step by step functions to be performed and the
test equipment to be used, and shall provide for full con-
formance with the provisions of the applicable documentation.
The Government reserves the right to review any of the indi-
vidual test procedures at its discretion.
c.
Quality verification testing may be monitored by a representa-
tive of the procuring activity.
4

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business