 |
|||
|
|
|||
| ||||||||||
|
|  MIL-V-85033A(AS)
3.2.4.2 Changes to the AS/QVPL. The contractor may develop alternative
sources for any part, subject to the provisions herein. Proposals by the
contractor for part substitution or changes to the AS/QVPL shall include proof
that the proposed substitute part will meet the requirements of 3.2.2 and
3.2.3. The AS/QVPL shall be revised and updated as applicable to include
approved changes.
3.2.4.3 Removal from the AS/QVPL. Evidence of poor quality may be cause
for suspension or removal of a source from the AS/QVPL at the OPtiOn Of the
contractor or the procuring activity. The contractor shall develop quality
verified sources for those parts for which the approved source has been re-
moved. Quality reverification shall be required under any of the following
conditions unless otherwise directed by the procuring activity:
When the part has been modified by a change in design, mate-
a.
rials, manufacturing process, manufacturing inspection pro-
cedures, or manufacturing facilities. The procuring activity
shall be notified prior to delivery of any parts incorporating
any such changes and be provided quantitative evidence of the
effect of such changes on the performance or other character-
istics of the charging valve.
b.
When there is evidence that the quality of the part has not
been maintained. This evidence may be in the form of accumu-
lated failure reports which indicated that the quality of the
part has deteriorated, or there is a failure trend.
When the manufacturer has not produced the item for 6 or more
c.
months.
3.2.5 Part conformance provisions. When a drawing or specification for a
part invokes by reference the provisions of a military specification, total
conformance to the provisions of the referenced specification shall be re-
quired. Total conformance is defined as conformance to the stated performance
and product characteristics, and compliance with all quality assurance provi-
sions, including qualification, quality verification, and quality conformance
testing.
3.3 Design and construction. The design and construction of the charging
valves shall be in accordance with the applicable drawings listed on DL
58A164D556 and as specified herein. The contractor shall notify the procuring
activity of any changes in design and construction after the charging valve
has been accepted by the procuring activity.
3.3.1 Materials. Materials shall be selected on the basis of strength,
workability and compatibility with other materials in the item so as to mini-
mize galvanic action, corrosion, etc.
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals