 |
|||
|
|
|||
| ||||||||||
|
|  MIL-V-85830(AS)
NOTES
6.
6.1 Intended use. The ventilator covered by this specification is
intended to provide the wearer of the PASS with filtered air for ground or
airborne use up to 10,000 feet cabin altitude in a CBR environment.
6.2 Ordering data
Acquisition documents should specify the
6.2.1 Acquisition requirements.
following:
Title, number and date of this specification.
a.
Applicable Government part number.
b.
Whether first article inspection is waived or the name and
c.
address of the first article inspection laboratory
and the name of the Government activity responsible for
conducting the first article inspection program (see 4.4.1).
If quality conformance verification inspection is required, the
d.
name and address of the designated laboratory and the Government
activity responsible for the verification program (see 4.6).
Applicable levels of preservation, packaging and packing (see 5.1
e.
and 5.2).
f.
Hose length (see 3.10.3).
Battery type.
9.
h.
Power cord length if different from that specified herein (see
3.1O.8).
6.3 Qualification. With respect to products requiring qualification,
awards will be made only for products which are, at the time set for opening
of bids, qualified for inclusion in the applicable Qualified Products List
whether or not such products have actually been so listed by that date. The
attention of contractors is called to these requirements. Manufacturers are
urged to arrange to have the products that they propose to offer to the
Federal Government tested for qualification in order that they might be
eligible to be awarded contracts or purchase orders for the products covered
by this specification. The activity responsible for the Qualified Products
List is the Commander, Naval Air Systems Command (Code 51122), Department of
the Navy, Washington, DC 20361-5110; however, authorization for qualification
of products shall be obtained from the Commander, Naval Air Development
Center, Narminster, PA 18974, (Code 6031). Prior to submission of the samples
for qualification inspection, the manufacturer shall submit a request to the
Naval Air Development Center (Code 6031) indicating a date on which the
samples can be forwarded and also request an authorization number to accompany
the samples.
6.4 First article. When a first article inspection is required, the item
should be a first article sample. The first article should consist of 3
complete ventilators. The contracting officer should include specific
instructions in acquisition documents, regarding arrangements for
examinations, tests and approval of the first article. Invitations for bids
should provide that the Government reserves the right to waive the
requirements for samples for first article inspection to those bidders
offering a product which has been previously acquired or tested by the
Government, and that bidders offering such products, who wish to rely on such
production or test, must furnish evidence with the bid that prior Government
approval is presently appropriate for the pending contract.
20
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals