Welding Rods and Electrodes; Packaging

• Welding Rods and Electrodes; Packaging
• Applicable Documents
• Other Government documents, drawings, and publications
• Non-Government publications
• Order of precedence
• First Article
• Table I. Summary of level A packing weights for electrodes
• Class 1 container
• Vacuum pouch
• Class 3a spools - packaging requirements
• Alternate class 3d - coils
• Fiberboard boxes
• General packing requirements
• Class 1b cylindrical containers
• Class 1a unit containers
• Class 2 unit containers
• Commercial
• Electrically conductive covered electrodes
• Quality Assurance Provisions
• Recurring inspections
• Table III. Classification of defects in accordance with the definitions of MIL-STD-109
• Units packs
• Shipping containers and pallet loads
• Acquisition requirements
• Consideration of data requirements
• Definition or explanation of terms
• Packing terms
• Detailed information
• Technical data
• Figure 1. Class 1c. vacuum package
• Figure 2. Dimensions for class 3a spools
• Figure 3. Dimensions for class 3b spools
• Figure 3. Dimensions for class 3b spools cont'd
• Figure 4. Palletized unit cylindrical containers)
• Figure 5. Pallet load rectangular containers
• Figure 6. Inner and outer shipping carton
• Figure 7. Shipping Carton with liners
• Figure 8. Shipping carton with insert
• Figure 9. Shipping carton - top or end loadings
• Figure 10. Shipping carton for top opening welding rod cans
• Figure 11. Vacuum test chamber and package schematic
• Apparatus
• Determining amount of vacuum
• Figure 12. Graph for determining amount of vacuum
• Engineering Drawings Technical Content Requirements
• Standardization Document Improvement Proposal
• Blank Page
• Blank Page

Welding Rods and Electrodes; Packaging

Privacy Statement - Press Release - Copyright Information. - Contact Us