 |
|||
|
Page Title:
Inspection equipment list codes |
|
||
| ||||||||||
|
|  MIL-W-60002A (MU)
6.3 Inspection equipment. -The con tract shall design
inspection equipment as required by the referenced Inspection
Equipment Lists (IEL) in accordance with the instructions of
paragraphs 6.3.1 through 6.3.7.
6.3.1 inspection equipment list. -Inspection equipment
lists indicate the availability of inspection equipment designs
by showing in the "number" column of the list of inspection
equipment (00 Form 1242-3) the numbers of drawings of existing
equipment designs or codes as indicated in paragraph 6.3.2.
Design action required of the contractor with respect to the
different types of drawings that may be listed is described in
paragraph 6.3.3 and 6.3.4. Action required by the contractor
with respect to commercial inspection equipment is described
in 6.3.5. The contractor will be required to prepare detailed
drawings in accordance with 6.3.6 for all the equipment coded
as "Contractor Design" in the number column. These contractor
designs must be approved by the Government prior to fabri-
cation or procuring of the equipment. Designs shall be submitted
for approval as specified in 6.3.7.
6.3.2 Inspection equipment list codes. -The inspection
equipment as defined in 6.3.3, 6.3.4, 6.3.5, and 6.3.6 will be
desigmated in the IEL by the following codes :
CDAF - Contractor's design responsibility on Army format
in accordance with MIL-D-45608.
CDCF - Contractor's design responsibility on contractor
format.
AD
- Army design.
ADMU - Army design, mandatory for use.
CE
- Commercial equipment.
SCD - Specification control drawing.
6.3.3 Army designs. -Army designs are reflected on detailed
drawings which completely depict all the information necessary
for the fabrication of the item of inspection equipment. The
contractor need provide no design when an Army design is listed
for an item of inspection equipment. Army designs fall into
two basic classifications, mandatory and non-mandatory. When
an inspection equipment list references mandatory Army designs,
the contractor shall comply with, and use these designs accord-
ingly. The contractor nay, however, in connection with non-
mandatory designs and with the approval of the Government,
design alternate inspection equipment or use comparable commercial
equipment to facilitate his operations. Such contractor prepared
designs (see 6.3.6) or commercial equipment selections (see
6.3.5) must be approved by the Government prior to fabrication
or procuring of the equipment. Designs shall be submitted
for approval as specified in 6.3.7.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals