 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-60985A (MU)
6.2 Inspection code numbers. -The five-digit code numbers assigned to
the inspections herein are to facilitate future data collection and analysis
by the Government. These code numbers are also used to correlate the character-
istics cited on Equipment Lists with the inspections listed in this specification.
These code numbers shall be listed on drawings of equipment designs submitted
by the contractor (See 6.3.5).
6.3 Inspection equipment. -The contractor shall design inspection equipment
as required by the referenced Equipment Lists (EL) in accordance with the in-
structions of Paragraphs 6.3.1 through 6.3.5.
6.3.1 Equipment lists. -Equipment lists indicate the availability of in-
spection equipment designs by showing in the "part Number" column of the list
of inspection equipment (Form SMUPA-1010) the numbers of drawings of Federal
Stock numbers of existing equipment designs, or codes as indicated in Paragraph
6.3.2. Design action required of the contractor is described in Paragraphs
6.3.3 and 6.3.4. The contractor will be required to prepare detailed drawings
in accordance with 6.3.4 for all the equipment coded as "Contractor Design"
in the "Part Number" column. These contractor designs must be approved by the
Government prior to fabrication or procuring of the equipment. Designs shall
be submitted for approval as specified in 6.3.5.
6.3.2 Equipment list codes. -The inspection equipment as defined in 6.3.3
and 6.3.4 will be designated in the EL by the following codes:
CD - Contractor design on controlled contractor format and/or commercial
equipment.
MU - Army design, mandatory for use.
6.3.3 Army designs. -Army designs are reflected on detailed drawings which
completely depict all the information necessary for the fabrication of the item
of inspection equipment. The contractor need provide no design when an Army
design is listed for an item of inspection equipment. Army design fall into
two basic classifications: Mandatory (designated "MU") and non-mandatory (in-
dicated by drawing or Federal Stock Number). When an equipment list references
mandatory Army Designs, the contractor may, however, in connection with non-
mandatory designs, with the approval of the Government, design alternate in-
spection equipment to facilitate his operations. Such contractor-prepared
designs (See 6.3.4) or commercial equipment selections must be approved by the
Government prior to fabrication or procuring of the equipment. Designs shall
be submitted for approval as specified in 6.3.5.
13
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals