 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-5O742[MU)
8 August 1973
4. QUALITY ASSURANCE PROVISIONS
inspection. Unless Otherwise specified
4.1 Responsibility
for
in the contract or purchase order, the supplier is responsible for the
performance of all inspection requirements as specified herein. Except
as otherwise specified, the supplier may utilize his own or any other
facilities suitable for the performance of the inspection requiremnts
specified herein, unless disapproved by the Government. The Government
reserves the right to perform any of the inspections set forth in the
specification where such inspections are deemed necessary to assure
supplies and services conform to prescribed requirements.
provisions. The component and subassembly inspec-
4.1.1 General
tion requirements of MIL-F-13926 form a part of the quality assuranc
provisions of this specification. Definitions (If inspection terms
shall be as listed in MIL-STD-109.
4.2 First article (initial production) approval. The require-
ment for first article approval and the responsibility Government or
contractor) for first article testing shall be as specific(l in the
contract. The sample for first article approval tests shall consist of
three units. The sample shall be manufactured in the same manner,
using the sample materials, equipment processes anti procedures as used
i n regular production. All parts and materials, including packaging
and packing, shall be obtained from the same source of supply as used
in regular production.
4.2.1 Government testing. When the Government is responsible
for conducting first article approval tests, the contractor, prior to
submitting the sample to the Government, shall inspect the sample to
insure conformance to all the requiarements of this specification. A
record of this inspection, including certificates of conformance for
materials, shall be submitted with the sample.
4.2.2 Contractor testing. When the contractor is responsible
for conducting first article approval tests, the sample shall be inspected
by the contractor for all the requirements of this specification. The
sample and a record of this inspection, including certificates of con-
formance for materials, shall be submitted to the Government for
approval. The Government reserves the right to witness the contractor's
inspection.
7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals