 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-52972A(ME)
a.
First article inspection (see 4.3).
b.
Quality conformance inspection (see 4.4).
c.
Inspection of packaging (see 4.6).
4.3 First article inspection.
4.3.1 First article examination. The first article shall be examined as
specified in table I. One or more defects shall be cause for rejection.
4.3.2 First article tests. The first article shall be subject to the tests
marked "X" in column 1 of table II, in the order shown. Failure of any test
shall be cause for rejection.
4.4
Quality conformance inspection.
4,4.1 Examination. Each compressor unit shall be examined for the defects
specified in table I. Presence of one or more defects shall be cause for
rejection.
4.4.2 Tests. Each compressor unit shall be subjected to the tests marked "X"
in column 2 of table II. Failure of any test shall be cause for rejection.
4.5 Inspection procedure.
Examination schedule.
TABLE I.
Requirements paragraph
Defects
3.1
Weight or dimensions not as specified.
101.
3.1
Configuration not as specified.
102.
3.3
103.
Material not as specified.
3.3*1
104.
Materials are not resistant to corrosion
or deterioration or treated to be made
resistant to corrosion or deterioration for
the applicable storage and operating environ-
ment as specified.
3.3.2
105.
Dissimilar metals as specified in
MIL-STD-889 are not effectively insu-
lated from each other as specified.
3.3.3
Contractor does not have documen-
106.
tation available for identification of
material, material finishes, or treatments.
3.5
Safety Provisions not as specified.
107.
3.6.2
108.
Maintainability provisions not as specified.
Engine or accessories missing or not as speci-
3.9
109.
fied.
3.9.3
V-Belt drive not as specified.
110.
3.8
Compressor unit not as specified.
111.
3.10
Air induction system not as specified.
112.
3.10.3
Final filter not as specified.
113.
15
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals