 |
|||
|
|
|||
| ||||||||||
|
|  MIL-D-63303B(AR)
b. Move the Launcher switch on the OCP to START. (Hold
until the Launcher ready lamp comes on). L39, L52, L53, and L69
should come on. L54 and L55 should cycle ON and OFF alternately.
The Launcher Ready Lamp on the OCP should be on. A click should be
heard each time L54 and L55 change.
c. Release the Launcher switch. L39 should go off. L56
should come on. Set the Pattern Selector switch on the OCP to 2.
L42 and L7 should come on; L43 and L6 should go off.
L8 and
d. Set the Pattern Selector switch on the OCP to 3.
L41 should come on; L7 and L42 should go off.
L9 and
Set the Pattern Selector switch on the OCP to 4.
L42 should come on; L8 should go off.
L1O
f. Set the Pattern Selector switch on the OCP to 5.
and L43 should come on; L9 and L42 should go off.
g. Set the Pattern Selector switch on the OCP to J. L43,
L54, L55, L10, and L41 should go off; L11 should come on.
L43, L54,
h. Hold the Jog switch on the OCP to the left.
L42 and L41 should come on; L11 should go off.
L43, L54, L42 and L41 should go
i. Release the Jog switch.
off; L11 should come on.
L43, L55
j. Hold the Jog switch on the OCP to the right.
and L42 should come on; L11 should go off.
L43, L55 and L42 should go off;
k. Release the Jog switch.
L11 should come on.
4.6.2.7.3.14 TEST OF LEFT DENSITY CIRCUITS.
a. Complete the BACP set-up. Remove the Launcher Gate
Pin. Set 200 on the left mine counter. On the OCP set the Pattern
Selector switch to 1.
L1, L4, L6,
b. Set the Mode switch on the OCP to DISPENSE.
L38 and L43 should come on.
c. Set the Left Density switch on the OCP to .001. Hold
the Launcher switch to START. L52, L53, L69 and L39 should come
on. L54 and L55 should cycle on and off alternately. A click
should be heard each time L54 and L55 change. The Launcher Ready
lamp on the OCP should come on.
46
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals