 |
|||
|
|
|||
| ||||||||||
|
|  MIL-D-63303B(AR)
d. Release the Launcher switch.
L39 should go off; L77,
L79 and L56 should come on.
e.
Set the Left Magazine switch on the OCP to FIRE. L45,
L46, L12 and L2 should come on. Depress Dispenser Countdown push
button S32 when run lamp L73 comes on. Each blink of L87 should
reduce by one the number on the OCP counter. The speed will
increase with the density.
L87
f. Set the Left Magazine Density switch to .005.
L44 and
should blink with each reduction of the count on the OCP.
L13 should come on; L45 and L12 should go off.
L87
g. Set the Left Magazine Density switch to .007.
L46 and
should blink with each reduction of the count on the OCP.
L14 should come on; L44 and L13 should go off.
L45, L44
h. Set the
Left Magazine Density switch to .01.
on; L46 and L14 should go off.
and L15 should come
i.
L44 and
Left Magazine Density switch to .025.
Set the
L15 should go off.
L16 should come on.
j. Set the Left Magazine Density switch to MAX. L87 should
stay lit constantly; L44, L17 and L78 should come on and L45 should
go off.
Replace Launcher Gate Pin.
k.
4.6.2.7.3.15 TEST OF RIGHT DENSITY CIRCUITS.
Complete the BACP set-up. Remove the Launcher Gate
a.
Pin. Set 200 on the right mine counter. Set the Pattern Selector
switch on the OCP to 5. Set the Mode switch to DISPENSE. L40, L41,
L1, L4, L10 and L38 should come on.
b. Set the OCP Right Density switch to .001. Hold the
Launcher switch to start, (Hold until the OCP Launcher Ready lamp
lights). L39, L52, L53 and L69 should come on; L54 and L55 should
cycle on and off alternately. A click should be heard each time L54
and L55 change. The Launcher Ready lamp on the OCP should come on.
L39 should go off; L77,
c. Release the Launcher switch.
L56 and L79 should come on.
d. Set the Right Magazine switch on the OCP to FIRE. L48,
L49, L18 and L3 should come on. Depress Dispenser countdown button
S33 when Run lamp L81 comes on. Each blink of L91 should reduce by
one, the number of the OCP mine counter. The speed will increase
with density.
47
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals