Manufacture of environmental test items

Page Title: Manufacture of environmental test items
Back | Up | Next

Web
www.tpub.com

Information Categories

....

MIL-I-85889(AS)

4.2.3.7 Configuration management plan. When specified in the contractor order, the contractor shall prepare

a configuration management plan covering Phases II and III of the development program. acceptance authority

shall be as specified herein (see 4.35 and 4.4.5). The plan shall be made available to the contracting activity for

acceptance no later than 30 days prior to the Preliminary Design Review.

4.2.3.8 Development specification. When specified in the contract or order, the contractor shall prepare a

Type B2, Critical Item Development Specification in accordance with MIL-STD-490 defining performance, design,

development and test requirements for the igniter. The specification shall be developed according to the format

specified in MIL-STD-961. The development specification shall be made available to the contracting activity no

later than 30 days prior to the Preliminary Design Review.

4.2.3.9 WSESRB data package. When specified in the contract or order, the contractor shall prepare a Weapon

System Explosives Safety Review Board (WSESRB) data package in accordance with NAVAIRINST 5100.7 The

data package shall provide background information supporting the planned system safety program. The data package

shall be made available to the contracting activity no later than 30 days prior to the Preliminary Design Review

4.2.3.10 WSESRB presentation. When specified in the contract or order, the contractor shall prepare a Weapon

System Explosives Safety Review Board (WSESRB) presentation in accordance with NAVAIRINST 5100.7. The

presentation shall be made to the WSESRB to obtain concurrence that the planned program satisfies current Navy

requirememts. The presentation shall be given to the WSESRB no later than 30 days prior to the Preliminary Design

Review.

4.2.3.11 Review agenda. When specified in the contract or order, the contractor shall provide the agenda for

the Preliminary Design Review. The agenda shall set forth the place time, date, purpose, and objectives of the

review. The agenda shall be made available to the contracting activity no later than 30 days prior to the Preliminary

Design Review.

4.2.3.12 Preliminary Design Review. At the conclusion of the Phase I effort and when specified in the contract

or order, the contractor shall conduct a Preliminary Design Review in accordance with MlL-STD-1521. Upon

satisfactory completion of the Preliminary Design Review, the contracting activity will authorize initiation of Phase II.

4.2.3.13 Review minuts. When specified in the contractor order, the contractor shall prepare a record of the

results of the Preliminary Design Review. A draft copy of the review minutes shall be made available to the contracting

activity for review and comment no later than 30 days following the review. The final review minutes shall be distributed

no later than 15 days after receipt of the contracting activity's comments.

4.3 Phase I - Design Verification.

4.3.1 Fabrication.

4.3.1.1 Manufacture of environmental test items. The contractor shall manufacture test units in accordance

with the approved Level 2 drawings

4.3.1.2 Manufacture of inert test items. The contractor shall manufacture inert test items which replicate the

mass properties of the live Type II igniter. The number of test items will be specified in the contract (see 6.2.1).

These test units will be employed for handling and container tests.

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business