 |
|||
|
|
|||
| ||||||||||
|
|  MIL-L-85532(AS)
4.8.6.3
Rain. The rain test shall be conducted in accordance
with MIL-STD-810, Method 506. 1, Procedure I.
4.8.6.4
Humidity, The humidity test shall be conducted in
accordance with Test Method No. 5 of Appendix A, except that the humidity
cycles shall not exceed 5.
Salt fog. The salt fog test shall be conducted in
4.8.6.5
accordance with MIL-STD-810, Method 509.1, Procedure I.
4.8.6.6
Fungus resistance. The fungus resistance test shall
be conducted in accordance with MIL-STD-810, Method 508.1, Procedure I.
4.8.6.7
Sand and dust, The sand and dust test shall be
conducted in accordance with MIL-STD-810, Method 510.1, Procedure 1.
5.
PACKAGING
Preservation and packaging. Preservation and packing
5.1
shall conform. to MIL-STD-2 81, level A (mobile) or level C (mobile.) and
as specified In the contract The dash panel shall be protected against
transportation damage.
6
NOTES
Intended use. The loader is designed specifically
6.1
for transporting, loading, and unloading weapons and stores weighing up
to 4500 pounds to and from the wing racks and centerline pylons of U.S.
Marine Corps Tactical Aircraft. The loader will be operated on prepared
surfaces such as concrete and asphalt.
Ordering data.
6.2
6.2.1
Acquisition requirements.
Acquisition documents
should specify the following:
a.
Title, number, and date of this specification.
b.
Level of preservation and packaging required
(see 5.1).
c.
Special marking, if required.
First article inspection, if other than
d.
specified (see 6.3.1).
e.
Where first article inspection shall be
conducted (see 6.3. la).
f.
Where first article inspection report shall be
sent.
19
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals