TABLE I - CLASSIFICATION OF DEFECTS
184.108.40.206 Acceptance and rejection.- Rejection lots shall be screened
for all defective characteristics. Removal correction of defective
units and resubmittance of rejected lots shall be in accordance with
"Acceptance and Rejection" as specified in MIL-STD-105.
4.3.3 Certification.- Certification shall include test data and
results for all characteristics specified below. Certification will
be required prior to performing final acceptance inspection and shall
suffice for the remainder of the production quantities, provided the
manufacturing processes and techniques used to produce the items for
which certification was issued have not been changed or revised. Any
and all changes will require a new certification from the contractor.
TEST DATA TO COMPLY WITH
4.3,4 Special sampling.- Samples shall be selected at random
from lots in accordance with inspection Level S-3 Table I of MIL-STD-
105. Acceptance or rejection of the lot shall be in accordance with
AQL 2.5 of Table II-A of MIL-STD-105. Samples shall have met all the
requirements and tests outlined in Table I prior to being subjected
to the following examination and tests.