 |
|||
|
Page Title:
Type III. Depot Maintenance Manuals |
|
||
| ||||||||||
|
|  MIL-M-81260A(AS)
c. Comparison of scope indications, when possible, with
actual maps of area indicated.
d.
Scope and instrument views illustrating proper and im-
proper indications.
3.5.5.3.2.2
As appropriate, procedures for emergency operation, such
as under" jamming" interference, or when the equipment is partially disabled,
shall be included. Instructions pertaining to substitute methods of operation when
there is failure of circuits, or improper functioning of components, shall be
provided.
3.6
TYPE III - DEPOT MAINTENANCE MANUALS
Content Requirements for Type III Manuals. - Type III
3.6.1
manuals shall provide depot level overhaul and repair instructions for aircraft
components, accessories, and equipment as directed by the procuring activity.
Depot maintenance manuals shall supplement the applicable intermediate main-
tenance manuals (and engineering drawings) to the extent necessary to assure
complete coverage for support of depot overhaul and repair requirements. In-
formation presented in intermediate and other manuals shall not be repeated in
depot manuals unless such duplication is essential for clarity and continuity,
and then such duplication shall be held to the minimum.
3.6.1.1
Simple Items. - Engineering drawings shall be given con-
sideration as being adequate coverage for simple items (components, etc).
When it is considered that engineering drawings are not adequate for depot level
maintenance, coverage shall be as provided herein.
3.6.1.2
Skill Level. - Information presented shall be prepared to
applicable skill levels of depot maintenance personnel. Redundant information and
procedures that are readily understood by observation of the equipment shall not
be included.
3.6.2
Content Arrangement For Type III Manual - In addition to,
and to supplement the applicable contents requirements specified in 3.3 through
3.3.3, the following shall be included in the order listed:
Section I
Introduction
Section II
Characteristics
Section III
GSE Maintenance
Depot Maintenance Instructions
Section lV
Difference Data Sheets
Section V
3.6.3
Introduction. - This section shall contain an introduction in
accordance with MIL-M-38784 and shall briefly state the physical and functional
characteristics of the component/equipment or accessory. However, data con-
tained in associated manuals covering the components/equipment or accessories
shall not be repeated except as specifically required for clarity or safety. In
addition, the requirements in 3.5.3.1.1 shall be included.
35
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals