 |
|||
|
Page Title:
Depot Maintenance Instructions. |
|
||
| ||||||||||
|
|  MIL-M-81260A(AS)
3.6.3.1
If the manual will include an illustrated parts breakdown,
and repair parts for the equipment are to be supplied in the form of kits, the
introduction of the manual shall contain the following statement: "Some repair
parts for the equipment covered by this manual are provided in the form of kits.
The Illustrated Parts Breakdown section hereof identifies these parts. Activities
shall replace all parts, regardless of condition, which are removed in the pro-
cess of disassembly with all like parts furnished in the kit. Therefore, in-
structions for cleaning, inspecting, and reworking such used parts have been
omitted. If parts in the kit must be cleaned, inspected, or tested prior to in-
stallation, instructions for performing these requirements are included in this
manual. Naturally, all defective parts are to be replaced; but a part unnecessary
to be removed in the process of disassembly, shall not be removed solely for
the purpose of replacement by a corresponding kitted part. "
3.6.3.2
If applicable, environmental control (clean room) infor-
mation required for overhaul of the equipment shall be specified.
3.6.4
Characteristics. - This section shall contain a brief ac-
count of peculiar characteristics essential for depot maintenance. Reference
shall be made to applicable organization and intermediate maintenance manual(s).
3.6.5
GSE Maintenance. - GSE maintenance shall be included in
accordance with 3.3.2. However, fabrication instructions for local manufacture
items are not necessary.
Depot Maintenance Instructions. - The manual shall contain
3.6.6
essential repair and overhaul information required to support a depot level
maintenance effort. This data shall supplement, and be compatible with, in-
formation contained in associated intermediate maintenance manual(s). Infor-
mation shall be provided to the authorized depth, as determined by the procuring
service.
3.6.6.1
Data shall be included to enable depot facilities to analyze
trouble and to effect repair of components/equipment, assemblies, subassemblies,
etc, which are beyond the capabilities of intermediate activities, even though
technical data, test equipment parts, etc, have been provided that level; or
upon which no technical data, test equipment, etc, was provided to the lower
levels because the item could not be economically maintained or repaired at
those levels.
Data shall be included to enable depot activities to determine
3.6.6.2
when components/equipment, assemblies, and subassemblies require only main-
tenance or repair or when they should be completely overhauled. Processing
instructions shall be included to reflect detailed mandatory parts replacement
information applicable to time replacement and forced removal components.
36
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals