Click here to make tpub.com your Home Page

Page Title: Transient Limits
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-N-85005A(AS)
(1) AC Power (Single Phase), 115V, Category B, 15 VA.
*
(2) AC Power (Three Phase), 115/200V, Category B, 1295 VA.
(3) DC Power, 28V, Category B, 14 watts
Transient Limits - The Integrated Tactical Display
3.3.12.1.1
System (ITADS) shall give satisfactory performance when the Operating
Power of 3.3.12.1 is within the bounds of the transient AC limits 2 and
3 of Figure 3 of MIL-STD-704, except that the upper operating limit shall
be 130 volts and the lower operating limit shall be 100 volts.  The ITADS
shall give satisfactory performance when the Operating Power of 3.3.12.1
is within the transient frequency limits 2 and 3 of Figure 5 of MIL-STD-704.
The ITADS shall give satisfactory performance when the Operating Power
of 3.3.12.1 is within the transient DC limits 2 and 3 of Figure 9 of
MIL-STD-704 except the lower limit shall be +25 volts.
Degraded Performance - Degraded performance will be
3.3.12.1.2
permitted from the ITADS for voltage transients not exceeding 0.5 second
during normal electric system operation.  Operation of the ITADS shall
return to normal with no resulting damage to the equipment.  Degraded operation
of the ITADS may occur when the input power exceeds the limits of Paragraph
3.3.12.1 but remains within limits 1 and 4 of Figures 3, 5, and 9 of
MIL-STD-704.  However, no damage shall be suffered by the ITADS and normal
operation of the ITADS shall automatically resume upon return of the input
power voltage to levels within the operating limits as defined above.
3.3.12.2 Synchro Power - Input power for synchro excitation shall
be supplied as follows:
AC Power (Single Phase), 26V, 400 Hz, 6 VA.
3.3.12.3 Lighting Power - Input power for lighting shall not exceed
6 amps at 0 to 26 VAC.
3.3.12.4 Other Power - Input power from the PP-4964/ASN-84 power
supply shall be supplied as follows:
(1) +5.25 .25 VDC, 8 Watts.
(2) +15 VDC (C), 0.5 Watts.
-15 VDC (C), 0.3 Watts.
(3)
(4) +26 VDC, 1 Watt.
-26 VDC, 1 Watt.
(5)
- 15 -

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business