 |
|||
|
|
|||
| ||||||||||
|
|  MIL-P-45575
3.2 Materials, constriction and design. The pistols shall conform
to the materials, construction and design requirements specified herein,
and shall be in accordancedance with approved inspection standards. The
a~ti~n and partS in rolling or sliding contact shall be of steel.
3.2.1 General characteristic. General characteristics shall be
in accordance with Table I.
TABLE I
General Characteristics
5 1/2 to 7 3/8 inches
Length of barrel
9 to 12 inches
Overall length
31 l/2 to 50 ounces
Weight (unloaded)
9 or 10 rounds
Magazine capacity
Barrel length. shall be interpreted as the length from the muzzle
face to the breech face with the action closed.
3.2.2 Frame. The frame of the pistol shall be a one piece steel
construction (homogeneous or welded) including the grip frame that houses
the magazine.
Finishes.
3.2.3
3.2.3.1 Machine finish. Machine finishes shall be in accordance
with good commerical practice for the type of pistols furnished. Approved
inspection standards (see 3.1.1) shall be used as standards for machine
finishes for pistols to be supplied under the contract. In the event of
a dispute over the comparrison of finishes of the manufacturing models
and the production pistols, referee comparison shall be in accordance
with ANSI B46.1.
3.2.3 Final proctective finish. The exterior metallic surfaces
shall be polished and blued, or finished in such other manner as approved
by the Government. The finish shall be applied so as not to draw the
temper or alter the form or dimensions of components sufficiently to
affect functioning. The finish shall be uniform in texture and appear-
ance. Approved inspection standards (see 3.1.1) shall be used aS
standards for final protective finishes for pistols to be supplied under
the contract.
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals