 |
|||
|
|
|||
| ||||||||||
|
|  MIL-P-46610E(MU)
3.7.1 Lead styphnate priming composition ingredients:
Calcium Silicide
Lead Styphnate
Aluminum
Tetracene
Penetaerythrite Tetranitrate (PETN)
Barium Nitrate
Lead Sulfocyanate
Lead Dioxide
Guncotton (Ground Nitrocellulose)
Zirconium
Gum Solution
Antimony Sulfide
3.7.2 Chlorate priming composition ingredients:
Antimony Sulfide
Potassium Chlorate
PETN
Lead Thiocyanate
Gum Solution
Trinitrotoluene
3,7.3 Priming composition for the No. 34 primer.-The priming composition
for the No. 34 primer (Drawing 810522621) `shall comply with the requirements
of Drawing 310522388.
3.8 Workmanship.-The requirements for workmanship are as specified on
the applicable drawings and the following:
3.8.1 Metal defects.-The primer shall be free of cracks, laminations,
nicks, dents, scratches, and other metal defects.
3.8.2 Foreign matter.-The primer shall be free of corrosion, stains,
discoloration, dirt, oil and other foreign matter.
.
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection.-unless otherwise specified in the
contract or purchase order, the supplier is responsible for the performance
of all inspection requirements as specified herein. Except as otherwise
specified in the contract or order, the supplier may use his own or any other
facilities suitable for the performance of the inspection requirements speci-
fied herein, unless disapproved by the Government. The Government reserves
the right to perform any of the inspections set forth in the specification
where such inspections are deemed necessary to assure supplies and services
conform to prescribed requirements.
4.1.1 Quality assurance terms and definitions.-Reference shall be made
to MIL-STD-109 for definition of quality assurance terms.
4.2 First article sample.
6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals