 |
|||
|
|
|||
| ||||||||||
|
|  MIL-P-46610E(MU)
4.4.6.1 Reduced testing.-Testing for priming composition may be reduced
if five consecutive lots all using the same primer mix and production process,
have met the requirements of 3.7. The reduced plan shall consist of testing
one out of every ten lots produced. The lots tested under the reduced plan
shall be selected randomly. Testing of every lot shall be resumed when the
requirements of 3.7 are not complied with or when the primer mix or production
process is changed.
5.
PREPARATION FOR DELIVERY
5.1 Levels of packing A and C shall comply with FED-STD-102.
5.1.1 Packing.
5.1.1.1 Level A.-The primers shall be packed in accordance with Drawing
F10535777, D7553274 or as required by contract.
5.1.1.2 Level C.-Unless otherwise specified by the procuring agency, the
primers shall be packed in standard commercial containers so as to insure
acceptance by common or other carrier for safe transportation to the point of
delivery. The primers shall be packed and spaced in such a manner that a bar-
rier of suitable material is present between the crown of one primer and the
base of another primer in order to resist mass detonation and shield the primers
from contact with stray electrical current, flame and shock.
5.1.2 Marking.
5.1.2.1 Level A.-Packing boxes shall be marked and labeled in accordance
with the applicable drawings cited in 5.1.
5.1.2.2 Level C.-Packing boxes shall be marked in accordance with MIL-
STD-129.
NOTES
6.
6.1 Ordering data.-Invitations for bids and contracts or orders will
specify the following:
a. Title, number and date of this specification.
b. Caliber and type of ammunition for which primer is intended.
c. Applicable packing container (see 5.1.1).
d. The appropriate cartridge cases, bullets, propellant and test
equipment when necessary for test purposes shall be supplied by the contracting
officer.
19
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals