 |
|||
|
Page Title:
Table I - Classification of Defects |
|
||
| ||||||||||
|
|  MIL-P-48619(AR)
tests for packaging, packing and marking shall be in accordance with
MIL-P-14232 and Section 5 herein. The tabulated classification of
defects in Tables I, II, III, IV and V shall constitute the minimum
inspection to be performed by the supplier after first article
approval and prior to Government acceptance or rejection by item or
lot.
4.4.2.3 100 Percent inspection. -The requirements and tests in
Table I shall be inspected on a 100% basis.
TABLE I - CLASSIFICATION OF DEFECTS
(100 Percent Inspection)
TEST PROCEDURE
REQUIREMENT
CHARACTERISTIC
CLASS
CRITICAL NONE
MAJOR:
4.6.6.3.3
3.8.3.1.1c
Line of sight variation,
101.
daylight viewing area
4.6.6.4.3
3.8.3.1.2c
Line of sight variation,
102.
passive viewing area
4.6.6.8
3.8.8.1
Resolution, daylight
103.
viewing area
4.6.6.9
3.8.8.2
Resolution, passive
104.
viewing area
4.6.6.1.1
3.8.9.1
Image intensifier tube
105.
4.6.6.1.2
3.8.9.2
Image steadiness
106.
4.6.6.1.3
3.8.9.3
Reticle brightness
107.
4.6.6.1.4
3.8.9.4
On-Off switch
108.
4.6.7.2
3.2b
Interchangeability, periscope
109.
with mount
MINOR:
None
NOTE:
The tests in Table I shall be conducted at a temperature
of
73 + 18F.
TABLE II - CLASSIFICATION OF DEFECTS
TEST PROCEDURE
REQUIREMENT
CHARACTERISTIC
CLASS
CRITICAL: NONE
MAJOR: AQL 0.65% Defective
4.6.2.1
3.5.1
110. Operability, elevation
input coupling
4.6.2.2
3.5.2
111. Operability, diopter movement
Daylight and Passive
13
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals