Quality Assurance Provisions

Page Title: Quality Assurance Provisions
Back | Up | Next

Web
www.tpub.com

Information Categories

....

MIL-P-63334(AR)

QUALITY ASSURANCE PROVISIONS

4.1 Responsibility for inspection. Unless otherwise specified in the

contract or purchase order) the supplier is responsible for the performance of

all insection requirements as specified herein. Except as otherwise speci-

fied, the supplier may utilize his own facilities or any other facilities

suitable for the performance of the inspection requirements specified herein,

unless disapproved by the Government. The Government reserves the right to

perform any of the inspections set forth in the specification where such

inspections are deemed necessary to assur supplies and services confom to

prescribed requirements.

4.1.1 General provisions. The component and subassembly inspection

requirements of MIL-F-13926 form a part of the Quality Assurance provisions of

this specification. Definitions of inspection terms shall be as listed in

MIL-STD-109.

4.2 First article (initial production) approval. The requirement for

first article approval and the responsibility (Goverment or contractor) for

first article testing shall be as specified in the contract. The sample for

first article approval tests shall consist of 3 panel assemblies plus 3 each

of all items covered by SQAP. The sample shall be manufactured in the same

manner, using the same materials, equipments processes, and procedures as used

in regular production. All parts and materials, including packaging and

packing, shall be obtained from the same source of supply as used in regular

production.

4.2.1 Government testing. When the Government is responsible for conduc-

ting first article approval tests, the contractor, prior to submitting the

sample to the Government, shall inspect the sample to insure that it conforms

to all the requirements of the contract and submit a record of this inspection

with the sample, including certificates of conformance for materials.

4.2.2 Contractor testing. When the contractor is responsible for conduc-

ting first article approval tests, the sample shall be inspected by the

contractor for all the requirements of the contract. The sample and a record

of this inspection, including certificates of conformance for materials, shall

be submitted to the Government for approval. The Government reserves the

right to witness the contractor's inspection.

4.3 Inspection provisions.

4.3.1 Submission of product. Unless otherwise specified by the contrac-

ting officer, inspection lot size, lot formation and preentation of lots

shall be in accordance with "Submission of Product" provisions of MIL-STP105.

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business