|
| MIL-P-63334(AR)
4.3.3 Acceptance and rejection. Rejected iota shall be screened for all
defective characteristics. Removal or correction of defective units and
resubmittance of rejected lots shall be in accordance with "Acceptance and
Rejection" as specified in MIL-STD-105.
4.4 Special sampling.
4.4.1 General. One panel assembly shall be selected at random as a
special sample from each 100 produced, or from each month's production
whichever occurs first. The sample shall meet the requirements and tests in
Table VI.
TABLE VI
REQUIREMENT
NO.
CHARACTERISTIC
TEST PROCEDURE
3.2
301.
Applicable drawing - visual
Fabrication
3.3
302.
MIL-F-13926 - visual
General specification
4.4.2 Environmental. Three panel assemblies shall be selected at random
as samples from each 50 produced, or from each monthts production, whichever
occurs first. Each sample shall meet the requirements and tests in Table VII
and shall then meet the requirements and tests in Table V.
TABLE VII
REQUIREMENT
cHARACTERISTIC
NO.
TEST PROCEDURE
StOrage temperatures
303.
(-80 to +160F)
3.4.4
4.6.2
3.4.3, 3.6.1
4.6.3, 4.6.5.3
304.
Rheostat performance
4.6.3, 4.6.5.4
3.4.3, 3.5.1.1
Rheostat R1
305.
4.6.3, 4.6.5.5
3.4.3, 3.6.1.2
306.
Rheostat R2
307.
Regulated output, switch S1
4.6.3, 4.6.5.7.1
3.4.3, 3.6.1.4
"OFF"
308.
Regulated output, 30 VDC
4.6.3, 4.6.5.7.2
3.4.3, 3.6.1.4
with minimum load
309.
Regulated output, 18 VDC
4.6.3, 4.6.5.7.3
3.4.3, 3.6.1.4
with minimum load
310.
Regulated output, 18 VDC
4.6.3, 4.6.5.7.4
3.4.3, 3.6.1.4
with maximum load
311.
Regulated output, 30 VDC
4.6.3, 4.6.5.7.5
3.4.3, 3.6.1.4
with maximum load
312.
Regulated output, 6.2 VDC
4.6.3, 4.6.5.7.6
3.4.3, 3.6.1.4
with maximum load
313.
Regulated output, 6.2 VDC
4.6.3, 4.6.S.7.9
3.4.3,
3.6.1.4
with minimum load
4.6.3, 4.6.5.8
3.4.3,
3.6.1.5
314.
Output voltage rise time
4.6.3, 4.6.5.10
3.4.3,
3.6.2
Battery charging circuit
315.
4.6.3, 4.6.5.11
3.4.3,
3.6.3
Controls
316.
4.6.1
3.4.2
317.
Shock
8
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |