 |
|||
|
Page Title:
Table IV. Inspection Lot Tests - Continued |
|
||
| ||||||||||
|
|  MIL-R-63997B(AR)
Endurance
4 7
4.7.8
3.4.7
4
Rifles
80 (30 Rnd)
M a g a z i n e s3
8 0 (30 Rnd)
1
Failure of the sample, unless otherwise specified in the
applicable test method to meet the requirements shall cause
rejection of the represented lot.
2
Failure of one rifle in the sample of thirty-two to meet
the requirements shall cause a second sample to be tested from the
The second sample shall consist of thirty-two rifles,
same lot.
exclusive of the first thirty-two, (Cumulative sixty-four
rifles).
Failure of two or more rifles in the first sample or the
combined first and second sample shall be cause for rejection of
the represented lot.
3
The 30 round magazines selected for the endurance test
shall be visually and manually inspected by the contractor for
workmanship and completeness of assembly and determined to be
satisfactory prior to test.
4
When five successive inspection lots meet the requirements,
the sample Shall be Selected from, group o f f i v e c o n s e c u t i v e l o t s
If rejection of a
or a week's production, whichever is larger.
group of five lots or a week's production occurs at any time, the
inspection lot size of 1,000 shall be reinstated and the above
procedure repeated in returning to the five lot (or larger) groups.
5
The sample shall be selected from each inspection lot of
repair parts.
6
When rifles are produced concurrently by more then one
manufacturer, each manufacturer shall forward five rifles monthly
(see 6.1) for the interplant interchangeability test. The
contractor will be informed of any failure of the rifles to meet
the prescribed requirements.
7
When five successive inspection lots meet the requirements,
the sample shall be selected from groups of" five Consecutive lots
If rejection of a
or a week's production whichever is greater.
group of five lots (or more) occurs due to an identifiable Class
II or III malfunction cause, to an identifiable Class I
m a l f u n c t i o n c a u s e w h i c h i s p r e v a l e n t i n t h e l o t~ o r f a i l u r e o f a
retested lot, the inspection lot size of 1,000 shall be reinstated
and the above procedure repeated in returning to the five lot (or
(For
definition
of
Class
I,II,
and
III
see
6.5.5.)
larger) group.
33
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals