 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-3443G (AR)
certified test report of the corrosion test on three parts and a
statement of compliance with applicable finish requirements of
3.10.13.2 herein, DOD-P-16232, and the applicable provisions of
MIL-W-13855. In lieu of certification, where practicable, the
Government representatvie may witness performance of accelerated
corrosion tests. Failure of any part shall cause rejection of
the represented lot.
b. Black oxide coating. For each day's production
from each processing tank, furnish a certified statement of
Compliance with 3.10.12.2 herein, MIL-C-13924, and the applicable
provisions of MIL-W-1385 (spot test not required).
c. Anodic coating. For each day' s production from
each processing tank, furnish a certified statement of compliance
with 3.10.13.2 and MIL-A-8625.
d. Touchup material per 3.10.14.
Statement
of
Compliance
e. Linseed oil.
Certified test report
4.5.3.5.1 Materials. Test required by applicabel drawings
and and specifications shall be performed on materials used in the
manufacture of shotguns. The contractor shall furnishe the
Government representative certified test reports of all tests
required for each lot of each material used. The contractor
shall also furnish certification that the materials used in
packaging conform to the applicable specifications
specified (see 6.2), the packaging examination and testing shall
be in accordance with MIL-P-116
Methods of inspection
4.6
4.6.1. Trigger pull test. Shotguns shall be tested for
trigger pull requirement see 3.17.1) at both the minimum and
maximum limits using a Government approved measuring device.The
shotgun shall be cocked and the safety shall be in the fire
position. The load shall be gradually applied to the center of
the trigger and exerted in a line parallel to the axis of the
bore.
4.6.2
Hiqh-pressure resistance test and headspace.
Shotguns shall be tested for high-pressure resistance requirement
(see 3.17.2) by firing one high pressure test shell in each
shotgun. After firing, shotguns shall be visually examined for
30
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals