Click here to make tpub.com your Home Page

Page Title: Additional data plates.
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-S-62294B(AT)
3.1.1.1 Treatment and painting. The vehicle shall be treated and painted in accordance with
MIL-STD-1223. As specified by the procuring activity for the appropriate service (see 6.2), the
exterior color shall be in accordance with MIL-STD-1223.
3.1.1.2 Marking and data plates. As specified by the procuring activity for the appropriate
military service (see 6.2), identification marking and data plates shall be in accordance with
MIL-STD-1223. When specified (see 6.2), concealed markings shall be furnished.
3.1.1.3 Rustproofing. When specified (see 6.2), the vehicle shall be rustproofed in
accordance with FED-STD-297
3.1.1.4 Wood treatment. Wood shall be treated in accordance with MIL-STD-1223.
3.1.1.5 Additional data plates. Additional data plates depicting the maximum towing speeds,
permissible loads and permissible load distributions shall be provided. The plates shall indicate
the maximum towing speeds with and without payload, the maximum concentrated payload for
each four foot segment of the entire length of the semitrailer, including the gooseneck, and the
longitudinal location, length and width(s) of the maximum concentrated loads permissible.
Appropriate loading instructions and cautions, as applicable to the manufacturer's design, shall
be furnished on the plates. A plate shall be provided on each side of the vehicle in a conspicuous
location. The plates shall conform to composition A (class l or 2) or composition C of MIL-P-
514.
3.1.1.6 Lifting and tying down attachments. When specified (see 6.2), the semitrailer shall
be equipped with lifting and tying down attachments. Lifting and tying down attachments shall
conform to type II or type III of MIL-STD-209. A transportation plate conforming to
composition A (class l or 2) or composition C of MIL-P-514 shall be attached to the semitrailer.
The transportation plate shall be inscribed with a diagram showing the lifting attachments and
proposed lifting slings, the capacity of lifting attachments and proposed lifting slings, the
capacity of each attachment, and the required length and size of each sling cable. A silhouette of
the semitrailer, showing the center of gravity, shall be provided on the transportation plate.
Tiedown attachments shall be identified by stenciling or other suitable markings. Tiedown
markings shall clearly indicate that the attachments are intended for the tiedown of the
semitrailer on the carrier when shipped.
3.1.1.7 Lubrication chart. When specified (see 6.2), a lubrication chart shall be provided.
The chart shall direct attention to all lubrication fittings and specify the range and grade of
lubricants required for critical temperatures. The chart shall be permanently attached to the
semitrailer in a readily visible location. The chart shall be inscribed on a plate conforming to
composition A (class l or 2) or composition C of MIL-P-514.
5

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business