TABLE II Marking Location and size.
3.27 Electromagnetic radiation. The truck shall not exceed the limits of
electromagnetic radiation specified in SAE J551.
3.28 High altitude electromagnetic pulse (EMP). When specified (see 6.2),
schematic and electrical diagrams detailed to the component level (i.e.,
resistors, capacitors filters, transistors (SCRs) with value of all components
of the truck shall be furnished by the contractor to the Government to assist
the Government in performing the EMP evaluation. When specified (see 6.2), a
truck shall be furnished to the Government and shall be evaluated by the
Government to determine necessary protection devices for protection against
3.29 Workmanship. Each truck shall have no evidence of cracks, dents,
scratches, burrs, sharp edges, loose parts, missing fasteners, distortions,
spatter, or foreign material. Workmanship of the truck should, in no case, be
less than that of comparable products furnished to the commercial market.
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise specified in the
contract or purchase order, the contractor is responsible for the performance
of all inspection requirements (examinations and tests) as specified herein,
Except as otherwise specified in the contract or purchase order, the
contractor may use his own or any other facilities suitable for the
performance of the inspection requirements specified herein, unless
disapproved by the Government. The Government reserves the right to perform
any of the inspections set forth in the specification where such inspections