Click here to make tpub.com your Home Page

Page Title: Cable Installation
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-T-81527B(AS)
(c) Flow - A flow switch shall allow interlocking of the MCS 28 Vdc
standby and operate signal with the fluid flow. It shall be C1OSed when the
fluid flow exceeds 2.75 gpm and shall be interrupted when the flow falls be-
The contacts shall be rated for 2A at 28 Vdc. The LIQ FLOW
low 2.5 gpm.
indicator shall be illuminated when the switch is open.
3.4.1.6.7.9.2 Filters..
(a) Magnetic Trap - A Magnetic Trap shall be provided in the coolant
fluid supply line which shall accumulate magnetic particles from the fluid.
When the Trap collects magnetic inpurities sufficient to close an electrical
circuit, the Magnetic Trap (MAC TRAP) indicator shall be lighted.
(b) Coolant Fluid - A nominal 30 -micron filter shall be provided in
the supply line.
(c) Sea Water - A bronze sea water strainer of 50 to 125 micron size
shall be provided in the inlet line.
3.4.1.6.8 Test Accessories.
The Cable Installation shall be a group of
3.4.1.6.8.1 Cable Installation.
cables, adapters, fittings, and associated hardware to provide the facilities
for connecting the Analyzer, Radio Frequency Noise (RFNA) to the MCS in the
various ways and combinations as required to perform the analysis of MCS
operation by the RFNA.
The Cable Assembly shall be in the form of
a kit delivered as one of the Test Accessories furnished with the table - rack,
Radar Maintenance.
Cables shall be provided as necessary to make all the
test setups for each measurement to be made by the RFNA (under the con-
dition that any cable may be used in more than one setup whenever feasible).
Any and all adapters need to match the cable(s) to the appropriate junctions
on the MCS and/or the RFNA shall be provided. All connectors on the
cables shall mate with the appropriate connectors. All cables shall be of
sufficient length to reach between connection points in a standard sidebench
installation but within permissable limits of attenuation.
55

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business