 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-82571A(OS)
marking of parts and assemblies, plating, riveting, machine screw assemblage,
welding, brazing, and freedom of parts from burrs and sharp edges. The
standards of workmanship exhibited in any approved preproduction sample,
subject to any qualification stated in the Government's notice of approval,
shall be determinative of the requirements of the contract relative to work-
manship insofar as not specifically covered by applicable specifications.
4.
QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise specified in the
contract or purchase order, the supplier is responsible for the performance
of all inspection requirements as specified herein. Except as otherwise
specified in the contractor order, the supplier may use his own or any other
facilities suitable for the performance of the inspection requirements spec-
ified herein, unless disapproved by the Government. The Government reserves
the right to perform any of the inspections set forth in the specification
where such inspections are deemed necessary to assure supplies and services
conform to prescribed requirements.
4.2 Classification of inspection. The examination and testing of Torpedo
Tube Mk 32 Mod 9 shall be classified as follows:
4.2.1 Preproduction and periodic production tests. Preproduction and
periodic production tests are those which are accomplished on samples
selected as specified in 4.3.1 and 4.3.3, which are representative of the
production of the torpedo tube assembly after the award of the contract, to
determine that the lot and production meet the requirements of this speci-
fication. These tests are detailed in 4.5. Acceptance shall be based on
no defects in a sample. Failure of a sample to comply with these require-
ments will result in the rejection of the lot, as determined by the procuring
activity.
4.2.2 Quality conformance tests. Quality conformance tests are those
performed on each torpedo tube assembly being submitted for acceptance under
contract. These tests, detailed in 4.4, shall be perfomed by the manufacturer.
4.3 Sampling
4.3.1 Preproduction sample. A preproduction sample of one torpedo tube
assembly, manufactured in accordance with 3.2.1 and preserved, packaged
and packed as specified in the contract or order, shall be subjected to
9
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals