 |
|||
|
|
|||
| ||||||||||
|
|  MIL-V-15508E
MILITARY (Cont'd)
Equipment and Systems Content
MIL-M-15071 - Manuals, Technical,
Requirements for.
MIL-P-15137 - Provisioning Technical Documentation for Repair Parts For
Electrical and Mechanical Equipment (Naval Shipboard Use).
MIL-B-16541 - Bronze, Valves: Castings.
MIL-E-17555 - Electronic and Electrical Equipment, Accessories, and Repair
Parts; Packaging and Packing of.
Flanges, Pipe, Bronze, Silver Brazing.
MIL-F-20042 -
MI L-F-24385 - Fire Extinguishing Agent, Aqueous Film Forming Foam (AFFF)
Liquid Concentrate, Six Percent, For Fresh and Sea Water.
STANDARDS
MILITARY
MIL-STD-129 - Marking for Shipment and Storage.
MIL-STD-417 - Rubber Compositions, Vulcanized General Purpose, Solid
(Symbols and Tests).
(Copies of specifications, standards, drawings and publications required by suppliers
in connection with specific procurement functions should be obtained from the procuring
activity or as directed by the contracting officer.)
2.2 Other publications . The following documents form a part of this specification
to the extent specified herein. Unless otherwise indicated, the issue in effect on date
of invitation for bids or request for proposal shall apply.
AMERICAN SOCIETY FOR TESTING AND MATERIAL (ASTM)
B61 - Steam or Valve Bronze Castings.
B143 - Tin Bronze and Leaded Tin Bronze Sand Castings.
B164 - Nickel-Copper Alloy Rod and Bar.
(Application for copies should be addressed to the American Society for Testing and
Materials, 1916 Race Street, Philadelphia, Pa. 19103.)
UNIFORM CLASSIFICATION COMMITTEE
Uniform Freight Classification Rules.
(Application for copies should be addressed to the Uniform Classification Committee,
202 Union Station, 516 West Jackson Boulevard, Chicago, Illinois 60606.)
NATIONAL CLASSIFICATION BOARD
National Motor Freight Classification Rules.
(Application for copies should be addressed to the National Motor Freight Traffic
Association, Inc., 1616 P Street, N. W., Washington, D, C. 20036.)
3.
REQUIREMENTS
3.1 Qualification. The valves furnished under this specification shall be products
which are qualified for listing on the applicable qualified products list at time set for
opening of bids (see 4.2 and 6.3) .
3.2 Material. The material used in the construction of the valves shall be as speci-
fied in tabl e I or shall be of equal or superior properties for the intended use.
Table I - Materials
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals