 |
|||
|
Page Title:
Test of Engine Temperature Circuits |
|
||
| ||||||||||
|
|  MIL-D-63303B(AR)
c. Move the operator control panel (OCP) engine switch to
START, - the following lamps should come on: L50, L51, L60, L67.
Lamp L66 should go off. The OCP Engine Running lamp should come on.
d. Release the OCP engine switch to the FUEL-ON position.
Lamp L51 should go off.
4.6.2.7.3.2 TEST OF ENGINE TEMPERATURE CIRCUITS.
Complete Bite Alarm Control panel (BACP} set-up. Move
S20 to the right; move S21 to WARNING. The following lamps may or
may not come on: L29 and L59. On the OCP, the malfunction lamp
should come on.
b. Move S21 to SHUTDOWN; L66, L59 and L29 should come on
and L67 and L60 should go off. On the OCP, the Engine Running lamp
should go off.
c. Move S21 to NORMAL; L65, L66 should come on and L59, L67
should go off. On the OCP, the malfunction lamp should go off.
Depress reset S9; L29, L66 should go off and L67 should come on.
d. On the OCP, move the engine switch to START; L60 and L51
should come on. On the OCP, the engine running lamp should come
on. Release the OCP engine switch; L51 should gO off.
4.6.2.7.3.3 TEST OF ENGINE OIL CIRCUITS.
a.
Complete the BACP set-up.
b. Move S19 to the right. Move S19 to the left. Move S20
to the right. Move S19 to the right; (wait 10-15 seconds) L66, L58
and L30 should come on. L64, L67 and L60 should go off. The Engine
Running lamp on the OCP should go off. The Malfunction lamp should
come on.
c. Move S19 to the left. L64 should come on and L58 should
go off. The Malfunction lamp on the OCP should go off.
d. Push S9. L66 and L30 should go off and L67 should come
on. Move the engine switch on the OCP to START; L51 and L60 should
come on. The Engine Running lamp on the OCP should come on.
L51 should go off.
Release the Engine switch on the OCP.
e.
4.6.2.7.3.4 TEST OF RIGHT TAPS/XMTR CIRCUITS.
Complete the BACP set-up. Move S15 to the right. Move
S23 to the left. Move S15 to the left. Move S15 to the right.
Move S15 to the left. Then move S25 to the left. L71 and L72
should go off and L32 and L68 should come on.
43
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals